top of page

PRODUCTS 

AH Design Components Ltd

All Products

Hardware

Fasteners

Plastic and Nylon Fasteners

  • Product No: AH.EPDM-178.178-S60
  • O-Ring EPDM  
  • ID (Inner Diameter): 1.78mm 
  • CS (Cross Section): 1.78mm
  • Material: EPDM 
  • Hardness: 60 Shore A
  • Colour: Black
  • Temperature : Flexibility across a wide temperature range.

 

 

See Full Products Section

Need more? Manufactured within Fifteen working days from order.

EPDM O-Ring 1.78x1.78mm EPDM - AH.EPDM-178.178-S60

£0.16Price

Buy More And Save With Our Quantity Discounts · Buy More And Save With Our Quantity Discounts

Quantity

      O-Rings - EPDM, 60 Shore A

      O-rings are circular sealing rings with a round cross-section. When an O-ring is fitted into a groove and compressed between two surfaces, it forms a seal that prevents the escape of liquids or gases. O-rings are suitable for both static and dynamic applications.


      These O-rings are made from EPDM (ethylene propylene diene monomer rubber). EPDM has excellent resistance to water, steam, ozone, sunlight and weathering, which makes it well suited to water systems and outdoor use. At 60 Shore A, the material is soft and flexible, so it conforms well to rough or uneven surfaces and seals with low compression force, making it well suited to low-pressure applications.


      Chemical Compatibility

      EPDM is recommended for use with hot water and steam, glycol-based brake fluids, glycol-based coolants, alcohols, silicone oils, and dilute acids and alkalis. The maximum temperature for hot water and steam depends on the grade of EPDM.


      Limitations

      EPDM is not recommended for use with mineral oils and greases, petroleum-based hydraulic oils, petrol, diesel or other hydrocarbon fuels, aliphatic or aromatic hydrocarbons, or chlorinated solvents. As a soft compound, 60 Shore A EPDM is not recommended for high-pressure applications, where a harder grade is required to prevent extrusion.


      Applications

      These O-rings are suitable for low-pressure water and steam systems, automotive cooling systems, valves, equipment used outdoors, and assemblies with delicate components such as plastic or glass, where low sealing force is needed.


      Installation Guidance

      Make sure that the groove and mating surfaces are clean and free from burrs. The 60 Shore A compound requires little force to fit and seals well against rough or uneven surfaces. Use only a silicone-based lubricant when fitting; never use mineral oil-based greases or oils, as these will damage EPDM. Do not stretch or roll the O-ring over sharp edges or threads.


      All dimensions are nominal. The information provided by AH Design Components Ltd is for reference only and is not a manufacturing specification. Please confirm that the product is suitable for your application before use.

      Need more? Manufactured within Fifteen working days from order.

      New Products in Focus 

      Technicians Working On Machine
      Office employee

      Buy More And Save With Our Quantity Discounts

      For All The Components You Can't Find On Our Store
      Our network of approved manufacturers in the United Kingdom offers pricing and estimated lead times. You will receive a competitive quote, typically within four working days.

      Related Products

      bottom of page